SCS

770750 | Dual Combination Tester

MOQ: 0
$918.84 $891.42
Contact Us for info

-       Tests operator’s path-to-ground; wrist strap limits 750 kilohms to 10 megohms; footwear limits 750 kilohms to 35 megohms*
Meets ANSI/ESD S20.20 Table 2 Personnel Grounding Requirement testing per ESD TR53.

-       Relay terminal
Pairs with a turnstile, automatic door or other locking system to control access to ESD Protected Areas.

-       Simultaneous testing in less than 3 seconds
Reduces time spent testing personal grounding devices used in ESD Control Plans.

-       Solid-state test switch with no moving parts
Maintains accuracy of tests and extends the lifetime of the tester.

-       Split foot plate for testing foot grounders (or shoes)
Tests both foot grounders independently at the same time.

-       Calibration unit available for accurate performance and conformity testing in the factory
See SCS item 770751.

-       100-240VAC power adapter with interchangeable plugs
Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe.

-       NIST calibrated with certificate included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, see Calibration.

-       Made in the United States of America 
This item is made and stocked in Chino, CA.

 

*Default test ranges listed. Additional test settings are noted in the tech bulletin TB-9069.

 

The Dual Combination Tester will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have a Resistance of < 3.5 x 107 ohms to meet the required limit of ANSI/ESD S20.20 tested per ANSI/ESD STM2.1 and ESD TR53.

Read more

Description

-       Tests operator’s path-to-ground; wrist strap limits 750 kilohms to 10 megohms; footwear limits 750 kilohms to 35 megohms*
Meets ANSI/ESD S20.20 Table 2 Personnel Grounding Requirement testing per ESD TR53.

-       Relay terminal
Pairs with a turnstile, automatic door or other locking system to control access to ESD Protected Areas.

-       Simultaneous testing in less than 3 seconds
Reduces time spent testing personal grounding devices used in ESD Control Plans.

-       Solid-state test switch with no moving parts
Maintains accuracy of tests and extends the lifetime of the tester.

-       Split foot plate for testing foot grounders (or shoes)
Tests both foot grounders independently at the same time.

-       Calibration unit available for accurate performance and conformity testing in the factory
See SCS item 770751.

-       100-240VAC power adapter with interchangeable plugs
Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe.

-       NIST calibrated with certificate included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, see Calibration.

-       Made in the United States of America 
This item is made and stocked in Chino, CA.

 

*Default test ranges listed. Additional test settings are noted in the tech bulletin TB-9069.

 

The Dual Combination Tester will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have a Resistance of < 3.5 x 107 ohms to meet the required limit of ANSI/ESD S20.20 tested per ANSI/ESD STM2.1 and ESD TR53.

Reviews (0)

Be the first to write a review

Additional info

SKU: S07-770750
UPC: 770750
Availability: Contact Us for info
Width: 24.00
Height: 18.00
Depth: 12.00