FR400-02 | Ultra Heavy Duty Desoldering Station

ULTRA HEAVY DUTY (UHD) DESOLDERING STATION The Hakko FR-400 Ultra Heavy Duty desoldering station is specifically designed for the difficult rework of extremely large mass components, such as high current inductor coils, heat sinks, large transformers, shields, and other connections where there is a significant amount of thermal inertia that must be overcome. Features: 300W Heating Element with a top Controlled Temperature of 940F (500C) The high mass of the heater and nozzles combined with the power and control of the composite ceramic heating cartridge allows for rework of some of the most challenging solder joints at only 750F (400C) and without preheating Anti-Clogging The anti-clogging Features: help ensure instantaneous application of peak vacuum pressure to the solder joint, and prevent the premature release of the vacuum system before the solder has cleared the heater and is captured in the solder collector chamber. Large Solder Collection Chamber The solder collection chamber is 3X larger in capacity than other Hakko desoldering stations, and it can be cleaned and re-used, reducing environmental waste. Large Easy-to-Read Display The display includes a vacuum indicator that lets you know if there are any restrictions building that will need to be cleaned out using the tools that are in the maintenance kit (included with the station.) Part Number: FR400-02 (see Specifications for details) Specifications Specifications Model Number FR-400 Part Number FR400-02 Input Voltage 120VAC 5060 Hz Power Consumption 320W Temperature Range 660 - 930F (350C - 500C) Temperature Stability 9F (5C) at idle ESD Safe Yes Safety Approval Station Output Voltage 29V Vacuum Generator Pump - Double Cylinder Vacuum Pressure (max) 80 kPa 600 mm Hg (24 in. Hg) Suction Flow 15 lmin Outer Dimensions 6.3 x 5.4 x 9.3 in. 160 x 237 x 235 mm Weight (wo cord) 12.6 lb. (5.7 kg) Handpiece Model FR-4001 Part Number FR4001-81 Power Consumption 300W (29V) Nozzle-to-Ground Resistance lt;2 ohms Nozzle-to-Ground Potential lt; 2 mV Heater Composite Ceramic Cartridge Nozzles N60 Series Standard Nozzle (included) N60-02 (1.0mm 0.04 in.) Cord Length 4 ft. (1.2 m) Total Length (wo cord) 7.2 in. (183 mm) Weight (wo cord) 0.54 lb. (245 g) As meaured with N60-02 nozzle installed Contents Part Number - - FR-400 UHD Desoldering Station FR4001-81 Gun-Style Handpiece FH400-82 Holder for FR-4001 handpiece C5011 Maintenance Kit Includes: B1087 - 1.0mm Cleaning Pin B1215 - Heater Cleaning Pin B1303 - 1.0mm Cleaning Drill B5082 - Nozzle Wrench A5020 - Station Filter (x2) A5019 - Handpiece Filter (x4) B2419 Power Cord - - Instruction Manual