Excelta

900-TXC | Pliers - Cut & Form Dog Leg - 5-Star - Carbon Steel - Lock in Lead forme

The 900-TXC five star 5.5 shear cutting and forming plier will form one lead in and one lead out at the same time on most radial type components. The added shear cutter saves component prep time...

903 | Cutters - Standoff Shear Large Frame - 5-Star - Carbon Steel - Heavy Dut

The 903 five star 5.5 heavy duty anti-shock shear cutter is designed for cutting of connector pins and large component leads. Tip width is .18. Recommended cutting capacity is 18AWG (.040 diameter)...

903A-030 | Cutters - Standoff Shear Large Frame -?????- Carbon Steel

903A-040 | Cutters - Standoff Shear Large Frame -?????- Carbon Steel

903A-050 | Cutters - Standoff Shear Large Frame -?????- Carbon Steel

903A-060 | Cutters - Standoff Shear Large Frame -?????- Carbon Steel

903A-CUSTOM | Cutters - Standoff Shear Large Frame -?????- Carbon Steel

903A-L | Cutters - Standoff Shear Large Frame - 5-Star - Carbon Steel

The 903A-L five star 6.5 narrow is a heavy-duty shear cutter with thin tips is ideal for cutting between component leads has a tip width of .100. Recommended cutting capacity is 18AWG (.040 diameter)...

907 | Pliers - Cut & Swage - 5-Star - Carbon Steel - Cuts lead .030"/swages

The 907 five star 6 anti-shock shear cutterswager cuts components leads to .030 and swages the end of the lead to prevent it from falling out of the P.C. board. Recommended cutting capacity is 20 AWG...

907-1 | Cutters - Standoff Shear Large Frame - 5-Star - Carbon Steel

The 907-1 five star 6 large anti-shock shear cutter reduces shock on delicate solder connections and sensitive components. The tip width is .170. Recommended cutting capacity is 20AWG (.032 diameter)...

907-101 | Pliers - Misc. Former - 5-Star - Carbon Steel - For Terminal Plugs

The 907-101 Five Star 6 terminal handling plier is designed to insert or extract the hard to reach terminal plugs. The inside jaw has a cutout to prevent nicking or pulling on the lead wire. It...

907-104 | Pliers - Transistor Forming - 5-Star - Carbon Steel - Thru-Hole

The 907-104 five star 5.5 transistor forming pliers is used in forming 3 leads on a TO-220 style transistor. The two outside leads will be bent .150, while the center lead is bent .025 from the body...