Tronex

5004 | CUTTER, 50 DEGREE TAPER FLUSH STANDARD

Large cutting edge with pointed tip. Short jaw for enhanced control. Flush cutting edges. Cutting Capacity Soft Copper Wire Diameter: .008 .031 ; .2mm .8mm ; 32AWG 20AWG

5031 | CUTTER 45 DEG. STANDOFF 0.5 MM LENGTH, FLUSH EDGE, STANDARD HANDLE

5032 | CUTTER 90 DEG. STANDOFF 1.0 MM LENGTH, FLUSH EDGE, STANDARD HANDLE

5035 | CUTTER 45 DEG. STANDOFF 1.5 MM LENGTH, FLUSH EDGE, STANDARD HANDLE

5048 | CUTTER, EXTRA FINE TIP RAZOR FLUSH STANDARD (Built to Order)

Miniature Tip Cutter with deep relief for an exceptionally low profile and extra fine tips. Features: Razor Flush cutting edges. ESD safe grips. Only available with standard handle length.

5049 | CUTTER, MINIATURE HIGH RELIEF RAZOR FLUSH STANDARD

Tip cutter with deep relief for an exceptionally low profile. Short sturdy jaw. Razor Flush cutting edges. Cutting Capacity Soft Copper Wire Diameter: .004 .025 ; .1mm .65mm ; 38AWG 22AWG

5070 | CUTTER, SMALL LONG JAW RAZOR FLUSH STANDARD

Most popular tip cutter. Jaw is twice as long as jaw of standard cutters. Jaw is slim with a low, relieved profile. Razor Flush cutting edges. Cutting Capacity Soft Copper Wire Diameter: .004 .031 ; ...

5071 | CUTTER, SUB-MINIATURE RAZOR FLUSH STANDARD

Most popular tip cutter. Jaw is twice as long as jaw of standard cutters. Jaw is slim with a low, relieved profile. Razor Flush cutting edges. Cutting Capacity Soft Copper Wire Diameter: .002 .016 ; ...

5072 | CUTTER, 50 DEGREE LONG OVAL FLUSH STANDARD

Largest cutting head. Robust. Excellent in cutting several leads in a single cut. Relieved for enhanced visibility. Flush cutting edges. Cutting Capacity Soft Copper Wire Diameter: .008 .390 ; .2mm...

5074 | CUTTER, 90 DEGREE MINIATURE FLUSH STANDARD (Built to Order)

Long, very narrow jaw with miniature opposing cutting edges at end permit cutting in highly confined areas. Razor Flush cutting edges. Cutting Capacity Soft Copper Wire Diameter: .008 .025 ; .2mm ...

5075 | CUTTER, 50 DEGREE MINIATURE FLUSH STANDARD (Built to Order)

An SMT cutter with a very small cutting head. Used for exceptionally fine cutting. Relieved for maximum accessibility. Razor Flush cutting edges. Cutting Capacity Soft Copper Wire Diameter: .004 .025...

5080 | CUTTER, 50 DEGREE SMALL TAPER FLUSH STANDARD (Built to Order)

New angulated cutter with a very pointed tip which allows for maximum accessibility into confined areas. Cutting Capacity Soft Copper Wire Diameter: .008 .030 ; .1mm .8mm ; 32AWG 20AWG